HOW TO install a hub guard on your p-fix

This is the first installment of the HOW TO section of this blog, i plan to show all my readers how to install or modify anything they request or i find is needed.

First up is!
HOW TO INSTALL A HUB GUARD on your NEW P-FIX!

What you’ll need:
– a hacksaw with many blade replacements
– a vice grip or anything to hold down a bolt
– a p-fix rear hub
– a fbm 14mm hub guard (this tutorial is made for this hubguard)
– tools to remove and install your wheel and cone nuts

STEP 1
remove the cone from the non-driveside (you’re going to cut it down to the correct size)
and place it on your vice-grip or a surface were you can go to work on.
STEP 2
cut it right before the bolt shape ends.
Photobucket

STEP 3
once that piece is cut off, pop the cone right back in how it was.
Photobucket

STEP 4
Once the cones are back in place put the FBM hubguard in the axle and install your wheel back on how you normally would.
STEP 5
Do not put the chain tensioner spacer back on the non-drive side, your chain tensioner bolt must be pushed up against the peg to create the tension.
Photobucket
STEP 6
your ready to go out and grind without hurting your hub with the protection of your newly installed hubguard !

Advertisements

One Response to “HOW TO install a hub guard on your p-fix”

  1. […] and saw they posted up a “how to” for putting a FBM hubguard onto the P-Fix hub. Head here for the full tutorial. +ShareFacebookRedditTwitterTumblrLike this:LikeBe the first to like this […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: